DispenseMate Series
IntelliJet Jetting System
NexJet Jetting System
DispenseJet DJ-9500
Conformal & Precise Coating
Solder Paste Dispensing
Underfill Dispensing
Dam and Fill Dispensing
Tilt Jetting
MEMS Solutions
LED Dispensing
SMA Jetting
Wafer Solutions
Two Component Dispensing
EMI Shield Spray Coating
DispenseJet DJ-2200
DispenseJet DJ-2100
Heli-Flow Series
Dual-Simultaneous Dispensing
Dual-Action Dispensing
Thermal Interface Material
Material Handling
ReadiSet Jet Cartridge
Exchanging the ReadiSet Jet Cartridge.
NexJet vs DJ-9500
NexJet NJ-8 System compared to our DispenseJet DJ-9500 dispensing underfill.
NexJet NJ-8 Wafer
NexJet NJ-8 System dispensing underfill on a wafer.
2nd Level Underfill
NexJet System jetting underfill.
Flip-Chip Underfill
NexJet System jetting underfill.
Flip-Chip Underfill
NexJet System jetting underfill.
NexJet Dual-Action Jetting
NexJet System jetting utilizing Dual-Action Dispensing.
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
SC-350 Select Spray Applicator
The SC-350 is specifically optimized to atomize coating fluids – delivering exceptional edge definition.
SC-300 & SC-350
Coarse and fine spray options with the SC-300 and SC-350 Select Coat Applicators
EasyCoat® 6 Software Tour
Take a tour of the new user interface and see visual programming in action.
SC-400 UV Material
SC-400 precise coating UV material.
SC-400 UV Material - Angled View
SC-400 precise coating UV material.
SC-400 Needle Finder
SC-400 needle finder.
DJ-9500 Precise Coating
DJ-9500 precise coating UV material.
SC-300 with Tilt
SC-300 with Four-Position Tilt Accessory.
SC-280 Conformal Coating
SC-280 conformal coating.
SC-280 with Fifth-Axis
SC-280 conformal coating with Fifth-Axis Tilt accessory.
Dual-Simultaneous Programmable Pitch
Conformal coating time can be cut in halve by using Dual-Simultaneous Programmable Pitch .
Triple Valve Coating
Select Coat SL-940 with DV-01, SC-280 and SC-400 coating.
SC-300
Coating in Bead Mode.
SC-300
Coating in Monofilament Mode.
SC-300
Coating in Swirl Mode.
Conexis CX-3040
Visually Tracking Program Coating Progress on the Board.
FX-940UV ACI Series
Inline automated conformal coating inspection.
S2 Solder Paste
Spectrum II dispensing solder paste dots and lines.
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
D-595 Solder Paste MEMS
DispenseMate D-595 dispensing solder paste for MEMS application.
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
Single Axis Tilt Jetting
Single Axis Tilt Jetting with the DJ-9500 and Spectrum II.
Tilt and Rotate Dual Axis Jetting
Dual Axis Jetting with the DJ-9500 and Spectrum II.
Tilt and Rotate Concentric Circles
Dual Axis Jetting with the DJ-9500 and Spectrum II.
D-595 Tilt Dispensing
DispenseMate utilizing tilt dispensing.
D-595 vs S2 Tilt Dispensing
Side-by-side of the DispenseMate and S2 running the same tilt program.
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
D-595 Solder Paste MEMS
DispenseMate D-595 dispensing solder paste for MEMS application.
LED Dual DJ-9500s
Spectrum II using Dual-Simultaneous to dispense LED application.
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
IntelliJet SMA
IntelliJet jetting surface mount adhesive material. Vantage vs Spectrum II.
D-590 Series SMA
DispenseMate D-590 Series Dual-Action SMA and Solder Paste.
ThermalJet TJ-03
ThermalJet jetting .
IntelliJet Wafer
IntelliJet jetting a wafer solution.
NexJet NJ-8 Wafer
NexJet NJ-8 System dispensing underfill on a wafer.
IntelliJet vs NexJet
Showing the capability of the IJ vs NJ.
Wafer Dispensing
Wafer Dispensing using the DJ-9500.
Two-Component Dispensing
Two-Component Dispensing Solution
Two-Component Dispensing
Dispensing Two-Component material into vials
DJ-2200 Spraying Thin Layer EMI Protection
Spraying at 4 different angles to cover the whole part.
DJ-2200 Spraying Thin Layer Silver
Two-Part Silver material selectively sprayed using the DJ-2200.
DJ-2200 Spraying Thin Layer Silver Close-up
Two-Part Silver material selectively sprayed using the DJ-2200.
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
Spectrum II and Chad WaferMate
Using the Chad Wafermate to load and unload wafers onto the Spectrum II Platform.
Spectrum II Utilizing Indexing
Using indexing to dispense on parts too big for Spectrum II Platform.
Spectrum II Dispensing on a Reel-to-Reel Part
Showing our capability to handle reel-to-reel parts on our Spectrum II platform.
D-590 Series Solder Paste
DispenseMate dispensing solder paste lines and dots.
D-595 Tilt Dispensing
DispenseMate utilizing tilt dispensing.
D-595 vs S2 Tilt Dispensing
Side-by-side comparison of the DispenseMate and S2 running the same tilt program.
D-590 Series TIM
DispenseMate dispensing thermal interface material.
D-595 CPJ
DispenseMate showing Cailbrated Process Jetting capabilities.
D-590 Series Offline MFC
DispenseMate showing Mass flow Control offline capabilities.
D-595 Dual-Action Solder & SMA
DispenseMate dispensing solder paste & SMA in dual-action configuration.
D-590 Series Solder Paste MEMS
DispenseMate dispensing solder paste for MEMS application.
IntelliJet Jetting System
ReadiSet Jet Cartridge quick exchange.
IntelliJet Wafer
IntelliJet jetting a wafer solution.
IntelliJet vs NexJet
Showing the capability of the IJ vs NJ.
IntelliJet Hertz
Comparing the IJ running at different speeds.
IntelliJet SMA
IntelliJet jetting surface mount adhesive material. Vantage vs Spectrum II.
IntelliJet Small Gap
IntelliJet animation jetting it a small gap.
IntelliJet Assembly
Assembling the IntelliJet Jetting System.
IntelliJet Disassembly
Disassembling the IntelliJet Jetting System.
DispenseJet DJ-9500
DJ-9500 dispensing underfill.
Wafer Dispensing
Wafer Dispensing using the DJ-9500.
DJ-9500 Precise Coating
DJ-9500 precise coating UV material.
NexJet vs DJ-9500
NexJet NJ-8 System compared to our DispenseJet DJ-9500 dispensing underfill.
Single Axis Tilt Jetting
Single Axis Tilt Jetting with the DJ-9500 and Spectrum II.
Tilt and Rotate Dual Axis Jetting
Dual Axis Jetting with the DJ-9500 and Spectrum II.
Tilt and Rotate Concentric Circles
Dual Axis Jetting with the DJ-9500 and Spectrum II.
D-595 Tilt Dispensing
DispenseMate utilizing tilt dispensing.
D-595 vs S2 Tilt Dispensing
Side-by-side of the DispenseMate and S2 running the same tilt program.
LED Dual DJ-9500s
Spectrum II using Dual-Simultaneous to dispense LED application.
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
IntelliJet Wafer
IntelliJet jetting a wafer solution.
NexJet NJ-8 Wafer
NexJet NJ-8 System dispensing underfill on a wafer.
2nd Level Underfill
NexJet System jetting underfill.
Flip-Chip Underfill
NexJet System jetting underfill.
Flip-Chip Underfill
NexJet System jetting underfill.
DispenseJet DJ-9500
DJ-9500 dispensing underfill.
NexJet vs DJ-9500
NexJet NJ-8 System compared to our DispenseJet DJ-9500 dispensing underfill.
DJ-2200 Spraying Thin Layer EMI Protection
Spraying at 4 different angles to cover the whole part.
DJ-2200 Spraying Thin Layer Silver
Two-Part Silver material selectively sprayed using the DJ-2200.
DJ-2200 Spraying Thin Layer Silver Close-up
Two-Part Silver material selectively sprayed using the DJ-2200.
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
D-595 Solder Paste MEMS
DispenseMate D-595 dispensing solder paste for MEMS application.
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
LED Dual DJ-9500s
Spectrum II using Dual-Simultaneous to dispense LED application.
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
NexJet Dual-Action Jetting
NexJet System jetting utilizing Dual-Action Dispensing.
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
S-822 Dam and Fill
Spectrum S-822 Dual-Action dam and fill with DV-7000/8000s.
Helios SD-960
Helios SD-960 dispensing thermal paste.